Filter
Top Products
Optical drive
NOTE: The optical drive is an optional feature and is available only on computer models equipped
with a low voltage (25-W) processor.
Description Spare part number
DVD±RW and CD-RW SuperMulti Double-Layer Drive 598776-001
DVD-ROM Drive 598775-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 44).
5. Remove the memory module compartment cover (see
Expansion memory module on page 48).
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Remove the two Phillips PM2.0×5.0 screws that secure the optical drive to the computer.
3. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (1) and press the
tab to the right to release the optical drive from the computer.
Component replacement procedures 59