Filter
Top Products
Card reader board
Description Spare part number
Card reader board (includes cable) 598768-001
Card reader board bracket 598767-001
Before removing the card reader board and bracket, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 44), and then remove the following components:
a. Memory module compartment cover (see
Expansion memory module on page 48)
b. Wireless module compartment cover (see
WLAN module on page 53)
c. Switch cover and keyboard (see
Switch cover and keyboard on page 65)
d. Display assembly (see
Display assembly on page 72)
e. Top cover (see
Top cover on page 81)
Remove the card reader board and bracket:
1. Detach the card reader board cable (1) from the surface of the top cover (2). (The card reader
board cable is attached to the top cover by double-sided tape.)
2. Turn the top cover upside down, with the front toward you.
84 Chapter 4 Removal and replacement procedures