Filter
Top Products
73
3 Interface Cards
SCSI Adapter Cards
SCSI devices to connectors 1 and 2.
For information on how to connect internal an external SCSI devices, please
read your User’s Guide.
SCSI Cable Information
The intended use of the external SCSI connector is to connect Low-Voltage
Differential SCSI devices to your Personal Workstation. This section
provides you with SCSI cable information that is important for the correct
operation of your external SCSI device.
NOTE The total length of the external SCSI cable should not exceed 10 meters
(approximately 32.81 feet) and there must be at least eight inches of cable
separating each device.
Contact you dealer to order shielded HP SCSI cables to connect external
SCSI accessories.
CAUTION:
Low-voltage differential SCSI is very sensitive to noise, and therefore, all cables on
the SCSI bus must be exceptionally high quality cables. Examples of these are given
in the following table.
Please make sure that any external hard disk enclosures are rated for low-voltage
differential SCSI use.
Cable Number Cable Length Description
C2978A 0.5m
68-pin HDTS
1
to 68-pin HDTS
1.
High Density Thumbscrew (HDTS)
C2979A 1.5m
C2911B 1.0m
C2924B 2.5m
C2361A 1.0m
68-pin VHDCI
2
to 68-pin HDTS
2.
Very High Density Cabled Interconnect (VHDCI)
C2362A 2.5m
C2363A 10.0m
C2365A 5.0m