Filter
Top Products
89
5 HP BIOS
Clearing the CMOS
Clearing the CMOS
1
Turn off the PC Workstation, disconnect the power cord and all cables,
then remove the cover.
2
Set the system board switch 8 to the ON position.
3
Replace the cover, and reconnect the power cord and video cable.
4
Reboot the PC Workstation. A message similar to the following will be
displayed:
“Configuration has been cleared, set switch Clear to the
ON position before rebooting.”
5
Turn off the PC Workstation, disconnect the power cord and video cable,
and remove the cover.
6
Set the system board switch 8 to the OFF position.
7
Replace the cover, and reconnect the power cord and data cables.
8
Switch on the PC Workstation. Run the Setup program by pressing
F2.
Then press
F9, the CMOS default values will be automatically downloaded
and saved.
9
Press
Esc to save the configuration and exit from the Setup program.