HP (Hewlett-Packard) YELLOWJACKET PLUS Network Card User Manual


 
Page 3
YellowjacketPLUS
with internal iPAQ
2.4 GHz antenna
iPAQ / YellowjacketPLUS
battery pack charger/cradle
IrDA USB
interface
Ni-MH battery packs
YellowjacketPLUS charger
with and power cord
Direction Finding
Antenna (optional)
The Yellowjacket SD Backup Installer card has
been included as a courtesy. The card may be
used to log data files onto. It can also be used
on iPAQs that have never been initially set up at
the BVS factory, have had files erased or dam-
aged in the ROM or after a hard reset has been
performed on an iPAQ. Yellowjacket software
that has been erased/lost from RAM may be
restored at anytime by accessing the “install”
file from the SD Card or Storage Card directory.
Always make sure batteries are fully charged
when doing any software installs. Yellowjacket
software that has been erased from RAM may
be restored at anytime by accessing the “rein-
styj” file from the \\iPAQ File Store\\My Device
directory.