Filter
Top Products
6. Put the blue paper stop on to the open end of the spindle, and push it towards the end of the roll.
7. Ensure the blue paper stop is pushed in as far as it goes; until both ends are against the stoppers.
If you are a regular user of different paper types, you can change rolls more quickly if you preload rolls
of different paper types on different spindles. Extra spindles are available for purchase, see
Accessories on page 105.
Load a roll into the printer
There are two ways to load a roll. The easy loading procedure is recommended.
CAUTION To start these procedures you must have a roll loaded on the spindle. See Load a
roll onto the spindle on page 25.
Easy loading procedure
1. Check that you are using the correct spindle for your type of paper, see Choose which spindle to
use on page 24.
2. Standing behind the printer, rest the spindle's black end on the left side roll holder. Do not put the
end completely into the roll holder.
3. Rest the blue end of the spindle on the right side roll holder. If you are loading the gray spindle,
ensure the rounded side of the spindle top is resting on the roll holder.
ENWW Load a roll into the printer 27
Paper handling