Filter
Top Products
14 Chapter1
Addendum to D Class Enterprise Servers System Installation Guide
Installation
Figure 1-1 Seismic Rack Installation
5. Attach the right and left main bracket panels (items 2, 3 in Figure 1-2
on page 15) to the vertical mounting rails of the relay rack, using
hardware item 24, Table 1-1 on page 10. The bracket panel is o riented
top to bottom as shown in Figure 1-2. Align the upper counter-sunk
hole on the panel with the hole in the vertical channel that was noted
in the previous step.
6. Attach the rear brackets (Figure 1-2, item 9, 2 places) to the right and
left main brackets, using item 19 hardware in three places as shown.
Attach to rear of relay rack using hardware items 16, 17, and 18 (4 pls
each s ide).
DClassServer