Filter
Top Products
Chapter 1 17
Addendum to D Class Enterprise Servers System Installation Guide
Installation
12.Attach cable retractor (item 26, Figure 1-3) to right main bracket as
shown.
13.Attach the slide assemblies to the main brackets using the top row of
holes (above the base pan). Do not tighten the hardware (items 20, 21)
yet.
NOTE These two a ssemblies are mirror image; ensure that they are oriented as
shown.
14.Position the base pan, installed in step 6, to support the slides by
exerting forceful upward pressure on the base pan; then secure all
fasteners including on the slides.
15.Extend slides until they lock and position the mounting tray (Figure
1-4, item 13) to the front extensions as shown. Engage alignment pins
for proper location and secure with item 19 hardware. Test for proper
installation by sliding to full extent of travel in and out. (Slide release
buttonsareonsidesofslidechannelsnearfront.)