Filter
Top Products
Chapter 1 19
Addendum to D Class Enterprise Servers System Installation Guide
Installation
18.Attach the latch panel (item 4) to front of mounting tray using five
screws.
19.With the computer securely engaged within the rack assembly, check
alignment of top cover (refer to Step 10) and tighten all fasteners.
Figure 1-5 Seismic Rack Installation
20.Install the emblem insert and door removed from the standard bezel
(refer to Step 3) onto the wide bezel (Figure 1 -6, item 14).
21.Remove handles from the wide bezel and position it onto the bezel
mounts attached to the rack.
22.Apply lock label (item 15) to the front door where shown.
DClassServer