Filter
Top Products
Computer Setup
Maintenance and Service Guide 5–5
Diagnostics menu
System Configuration menu
✎
Some of the listed System Configuration options may not be supported by your computer.
Select To do this
System Diagnostics menu ■ F1 System Information
–Displays the following information:
❐ Identification information for the computer and the batteries in the
system.
❐ Specification information for the processor, cache and memory size,
system ROM, video revision, and keyboard controller version.
■ F2 Start-up Test
–Verifies the system components needed for starting
the computer.
■ F3 Run-In Test
–Runs a comprehensive check on system memory.
■ F4 Hard Disk Test–Runs a comprehensive self-test on any hard drive in
the system.
Select To do this
Language Change the Computer Setup language.
Boot Options ■ Set a Startup Menu delay (in seconds).
■ Enable/disable Custom Logo (disabled by default).
■ Enable/disable Display Diagnostic URL (enabled by default).
■ Enable/disable CD-ROM boot (enabled by default).
■ Enable/disable SD Card boot (enabled by default).
■ Enable/disable floppy boot (enabled by default).
■ Enable/disable PXE Internal NIC boot (enabled by default).
■ Set the Express Boot Popup delay in seconds.
■ Set the boot order.
(Continued)