Filter
Top Products
Read SAFETY GUIDELINES ( to ) carefully to ensure maximum safety before
proceeding to these steps:
• Choose an appropriate site and install the product on a level table where the stand is secure.
• Install the monitor to have ready access to a power socket available.
• Make sure that the power switch of this device is turned off.
(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
• See "Product Specifications" concerning the specifications of this device.
(2) Make sure that the power switch of the personal computer is turned off.
(3) Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output
terminal of the personal computer.
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with
the personal computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer or ask the
personal computer manufacturer or your local retail dealer.
ENGLISH
Connecting to a PC
INSTALLATION INSTRUCTIONS (continued)
RS232C
RGB 2
D-SUB IN
RGB 1
D-SUB IN
AUDIO IN
Monitor rear panel
Power
cable
Power cable
connector
PC
Speaker (R)
Speaker (L)
To signal
input
terminals
To audio input terminals
To signal
output
terminal
To audio
output
terminal
3.5mm
Stereo
mini jack
Cord Clamper
When connecting a
computer audio input to
the unit (using a 3.5mm
stereo mini jack), the
cord must pass through
the cord clamp toward
the bottom of the back of
the main unit. If it does not,
there is a possibility of
insufficient suppression of
electromagnetic radiation.