Hitachi CMP4202 Computer Monitor User Manual


 
Product specifications and designs are subject to change without notice.
PRODUCT SPECIFICATIONS
The monitor takes at least 30 minutes to attain the status of optimal picture quality.
This function can only be used when the optional video unit has been inserted.
Signal Input
RGB terminal (D-sub 15-pin connector)
When different kinds of input signals are simultaneously input to
the monitor via a graphics board or the like, the monitor will
automatically select the signals in the following priority order:
*Even in the case of the recommended signals shown on the
following page, there may be instances when correct display is
not possible. In this case, use H/V separate sync, H/V composite
sync.
Panel
Display
dimensions
Approx. 42 inches (922 mm (H), vertical 522 mm (V), diagonal 1059 mm)
Resolution 1024 (H) x 1024 (V) pixels
Input signals
Input terminals
RGB input VIDEO input*
RGB one-line two input terminals (D-sub 15-pin)
RGB audio two-line two input terminals
(3.5mm Stereo mini jack)
Video 1 video input terminal (RCA)
Video 1 audio input terminals (left, right) (RCA)
Video 1 S video input terminal (S)
Video 2 video input terminals (Y) (Pb/Cb) (Pr/Cr) (RCA)
Video 2 audio input terminals (left, right) (RCA)
Video signals
0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
1080/50i, 1080/60i
VIDEO input 1 : NTSC, NTSC-4.43, M-PAL, PAL60, PAL,
N-PAL, SECAM
VIDEO input 2 : 480/60i, 480/60p, 720/60p, 1080/60i, 1035/60i,
576/50i, 576/50P, 1080/50i
Sync signals
H/V separate, TTL level [2K]
-
H/V composite, TTL level [2K]
-
Sync on green, 0.3 Vp-p [75]
-
Video output Signal
-
Through output (RCA) of VIDEO1 input.
Recommended Signal 31 modes 16 modes
Audio output terminal 10W + 10W (6)
Input power
AC100 - 120 / 200 - 240V(automatically selected) 3.7A / 2A
Power consumption 370W
External dimensions 1030 (W) x 636 (H)x 89 (D) (mm) (excluding the stand)
Mass 31kg (excluding the stand), 35kg (When mounted on optional stand.)
Ambient
conditions
Temperature
Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C
Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Sync signal type Priority
H/V separate sync. 1
H/V composite sync. 2
sync.on Green * 3
Pin
Input signal
1 R. video (PR/CR)
2 G. video or sync on green (Y)
3 B. video (PB/CB)
4 No connection
5 No connection
6 R.GND (PR/CR, GND)
7 G.GND (Y, GND)
8 B.GND (PB
/CB, GND)
9 No connection
10 GND
11 No connection
12 [SDA]
13 H. sync or H/V composite sync
14 V.sync. [V.CLK]
15 [SCL]
( ) : With RGB component input