Filter
Top Products
4-2 Performing Storage Navigator Operations
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Editing the Storage Device List
Cautions:
• Only a storage administrator with the Enable authority of Storage
Administrator Role can edit the storage device list.
• If you edit the storage device list to change the settings, you must back up
the Storage Navigator configuration file by downloading the file from the
SVP. For instructions on downloading the configuration file, see
Downloading the Configuration Files.
Adding a New Storage Device
To add a new storage device (storage system):
1. On the Web browser of the Storage Navigator computer, access the URL of
the primary SVP to open the Storage Device List dialog box.
2. On the Storage Device List dialog box, click the Edit button (
).
The login dialog box is displayed.
3. Enter the user ID and password, and click Login.
The Storage List Editor dialog box is displayed (see Figure 3-20).
If the SVP is set to support SSL-encrypted
communication, security
messages might appear. For details, see Using SSL-Encrypted
Communication.
4. Click New Entry to o
pen the Storage Entry dialog box (see Figure 4-1).
5. On the
Storage Entry dialog box, fill in all the information about a storage
system you want to add. See Table 3-8 for detail on format.
– You can enter only one of these (a host name, IPv4 address, or IPv6
address) for Host Name / IP Address.
– You can use HTTP Block to block HTTP communication in the
environment supporting the encrypted communication by SSL
communication (HTTPS). For more detailed information, see the
Encrypted Communications User's Guide.
6. Click Submit to register the entry.
A confirmation message is displayed.
7. Click OK to register, or click Cancel to cancel.
When the entry is registered successfully, a completion message is
displayed.
8. Click Close.
The new entry is added to the end of the list on the Storage List Editor
dialog box.
9. On the Storage List Editor dialog box, click the Logout button (
).
You return to the Storage Device List dialog box.