Filter
Top Products
Using the Storage Navigator CLI 5-15
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Specify the program product that you use a spreadsheet for.
• Type
Specify the configuration type of a spreadsheet.
Operation Tags
A tag to label settings (parameters) is required for a spreadsheet. This tag is
called an operation tag, which is formatted as a string in square brackets ([ ]).
Operation tags are already written in the templates.
Operation tags have two types: common operation tags for all program
products and program-product-specific operation tags. For details on common
operation tags, see Common Operation Tags. For program-product-specific
operation tags, see the documents for program products that support the
Storage Na
vigator CLI.
Operation tags have the following characteristics:
• At least one program-product-specific operation tag is required in a
spreadsheet.
• Common operation tags must be written first (before program-product-
specific operation tags are written).
An error occurs if program-product-specific operation tags are written
before common operation tags.
• Some combinations of operation tags cannot be used in the same
spreadsheet.
In this case, you need to prepare multiple spreadsheets. For details, see
the documents for program products that support the Storage Navigator
CLI.
Parameters
You can specify the configuration of the storage system as a parameter. Each
parameter must be separated with a comma ( , ). A semicolon ( ; ) is required
at the end of the line where a parameter is written. Note that a comma is
required as separator even before the semicolon.
An example of writing a parameter is as follow:
[SerialNumber]
65536,;
Parameters might be written in a hierarchy structure for a certain program
product. The identifier (+) is required at the beginning of a line, and must
appear in the following order:
1. +,
2. +,+,
3. +,+,+,