www.hi-ti.com
26
[
Magnetic Encoding
]
A
Magnetic Encoding Data: Input Magnetic Data directly
. When you are not using the
database, you can manually enter data for the encoding of the magnetic stripe.
There are three tracks within the magnetic stripe. The first track includes
alphanumeri
c characters and other simple symbols. The second and the third
tracks accept numeric characters only.
When you mark □Track 1, □Track 2, □
Track 3 for data encoding, the function of
□Using Database will be disabled. When you mark □Using Database for dat
a
encoding, □Track 1, □Track 2, □Track 3 will be disabled.
B
Using Database: Apply database for encoding. Browse: browse
the path for a
database. Encoding Data Start From:
Decide which data to start encoding from a
database.
Notice: The database functi※
on is for the user who needs encoding by database but
is not using Card Desiree CS as their application program.
C
Encoding Port: The information about the connection port.
D
Times of Retrying: After finishing encoding, the encoder will automatically r
ead the
data for verification
purposes. If the reading fails, the device can be set to repeat
the process according to the setting of the user.
E
Database Sample: There is a Database Sample
for your reference. The format of a
database must match this sample. After expressing this button, it will show the data
samples as follows:
1 ABCDEFRG
2 12345678
A
B
C
D
E