Filter
Top Products
Access PrePack System Operator Manual
F-35512 (Mar. 2006) 3-1 Using the Access PrePack System
Chapter 3:
Chapter 3: Using the Access PrePack System
Using the Access PrePack
System
Power Up the System
To power up the Access PrePack System, use the on/off switch
located on the back of the printer.
Logging onto the System
The Access PrePack System may require each operator to login
before use. Not all system are setup to have operator’s login.
The instructions for using this system are detailed in this chapter.
To login to the system you should be at the Operator Login
Screen shown below.
To Login to the System
: TOUCH the Operator ID field and
TYPE your Operator ID. You should now be on the Operator
Main Menu Screen.
To Logoff the Operator Main Menu Screen
: TOUCH Logoff on
the Operator Main Menu Screen. No further action is required.
The Operator Login Screen will be displayed.