Filter
Top Products
6 - 28
Step 1. Scan the 1st Left Identifier bar code, below.
Step 2. Use the Programming Chart to scan 3, D (hex for “=”).
Step 3. Scan the 2nd Left Identifier bar code, below.
Step 4. Use the Programming Chart to scan 4, 7 (hex for “G”).
Step 5. Scan the 1st Right Identifier bar code, below.
Step 6. Use the Programming Chart to scan 3, D (hex for “=”).
Step 7. Scan the 2nd Right Identifier bar code, below.
Step 8. Use the Programming Chart to scan 3, C (hex for “<”).
Step 9. Scan Save.
Once you have programmed the concatenation sequence, use ISBT 128
User-Defined Concatenation Sequences to enable this feature.
Default =
0.
ISBT 128 User-Defined Concatenation Sequences
On/Off
The following selections allow you to enable or require the User-Defined
ISBT 128 Concatenation Sequences.
If you scan Off, the User-Defined concatenation sequences are disabled.
If you scan the Allow User-Defined Sequence code, then the scanner will
output only the data combination specified in the User-Defined concatena-
tion sequence you created.
1st Left Identifier
2nd Right Identifier
1st Right Identifier
2nd Left Identifier