Honeywell 1200G Scanner User Manual


 
6 - 29
If you scan the Require User-Defined Sequence code, the data combina-
tion specified in the User-Defined concatenation sequence is required to
transmit the data. No data is output unless the sequence is read.
Default = Off.
Content Verification
When the On bar code is scanned, the check character values are output
along with the bar code data, thus allowing you to verify that the check
character is in agreement with that calculated for the data stream.
Default
= Off.
Transmit Identifiers
You may disable the transmission of the ISBT Code 128 data identifiers by
scanning Off. When this selection is Off, the first 2 data (ID) characters are
removed from the data stream unless the ISBT code contains the Donation
Identification Number identifiers. If the code contains the Donation Identifi-
* Off
Require User-Defined Sequence
Allow User-Defined Sequence
* Off
On