Honeywell 3820 Barcode Reader User Manual


 
1 - 12
Using the Image Scanner with Bluetooth Devices
The 3820/3820i image scanner may be used either with the 2020 base or with
other Bluetooth devices. Scanning the Non-Base Bluetooth Connection bar
code below allows the image scanner to be used with other Bluetooth devices
(e.g., PDA, PC - Bluetooth USB Adapter). After you scan the bar code below,
follow the instructions supplied with your Bluetooth device to locate the image
scanner and connect to it. If you go out of range with your image scanner, the
image scanner automatically reconnects to the Bluetooth device. If you want to
relink to the 2020 base, refer to
"Override Locked Image Scanner"
on page 1-6
or
"Resetting the Standard Product Default Settings: All Application Work
Groups"
on page 1-11
.
Note: The multiple work groups option is not available when you are using the
imager with Bluetooth devices other than the 2020 base.
Changing Bluetooth PIN Code
Some devices require a PIN code as part of the Bluetooth security features.
Your image scanner’s default PIN is 1234, which you may need to enter the first
time you connect to your PDA or PC. The PIN code must be between 1 and 16
characters. To change the PIN, scan the bar code below and then scan the
appropriate numeric bar codes from the Programming Chart inside the back
cover of this manual. Scan Save to save your selection.
Note: Refer to Minimizing Bluetooth/ISM Band Network Activity beginning on
page B-1 for additional Bluetooth/ISM information.
Out-of-Range Alarm
Duration
If your image scanner is out range of the base, an alarm sounds from both your
base and image scanner. To activate the alarm options for the image scanner
or the base and to set the alarm duration, scan the appropriate bar code below
Non-Base BT Connection
Bluetooth PIN