Filter
Top Products
7 - 25
EAN/JAN-13 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
EAN/JAN-13 Addenda Required
When Addenda Required is set to on, the image scanner will only read EAN/
JAN-13 barcodes that have addenda.
Default = Not Required.
EAN/JAN-13 Addenda Separator
When this feature is on, there is a space between the data from the barcode
and the data from the addenda. When turned off, there is no space.
Default = On.
Note: If you want to enable or disable EAN13 with Extended Coupon Code,
refer to UPC-A/EAN-13 with Extended Coupon Code (page 7-21).
* 5 Digit Addenda Off
5 Digit Addenda On
* 2 Digit Addenda Off
2 Digit Addenda On
* Not Required
Required
Off
* On