Filter
Top Products
8 - 20
X - Horizontal Barcode Offset
The horizontal barcode offset allows you to offset the horizontal center of the
signature capture area. Positive values move the horizontal center to the right
and negative values to the left. Measurements are in multiples of the minimum
bar width.
Y - Vertical Barcode Offset
The vertical barcode offset allows you to offset the vertical center of the
signature capture area. Negative numbers indicate that the signature capture
is above the barcode, and positive numbers indicate that the area is below the
barcode. Measurements are in multiples of the minimum bar width.
RF Default Imaging Device
The image scanner supports imaging command processing (IMGSHP, IMG-
SNP, IMGBOX) so that QuickView (see "QuickView" on page 11-6) and other
applications are able to perform imaging functions as if they were talking
directly to an image scanner. To accomplish this, the image scanner uses a
menu command called RF_DID (RF Default Imaging Device). RF_DID is the
name of the image scanner (BT_NAM) that is to receive imaging commands.
The default for RF_DID is “*”indicating that imaging commands are to be sent to
all associated image scanners. Change this setting to RF_DID
image
scanner_name
to ensure that they are sent to a particular image scanner.
Refer to "Image Scanner Report" on page 11-3 to generate a report containing
the port, work group, image scanner name, and address for each image scan-
ner. Refer to "Image Scanner Name" on page 3-7 set a unique name for each
image scanner.
Example of Horizontal Offset set to -75X:
Example of Horizontal Offset set to 75X:
Example of Vertical Offset set to -7Y:
Example of Vertical Offset set to 65Y: