Filter
Top Products
10 - 7
Troubleshooting
If you encounter problems with your charger, refer to chart below for possible solutions. If problems
persist, please contact Limited Warranty (see page 13-2).
Problem Issue
The Status LED does not come on
when I insert a battery pack.
Check the power connections; make sure the POWER switch is
ON and the battery pack is properly seated.
The Status LED lights red during
charging.
Try to charge the battery in one of the other charging slots. If the
Status LED lights red again, then the problem is associated with
the battery pack.
The Status LED lights red and
stays on without a battery in the
charging slot.
An error occurred during the self-diagnostic test for that particular
charging pocket. Call Honeywell Product Service and request an
RMA.
For additional warranty and return information, see Customer
Support and Warranty on page 13-1.