Honeywell CP-700 Barcode Reader User Manual


 
WEB-700 WEB-700-O CP-700
95-7776—03 4
.
Fig. 2. WEB/CP-700 main controller board and 2 option cards uninstalled.
As a 7 series controller, the WEB/CP-700 uses a PowerPC 440EPx processor, 1GB Flash storage, and 1 GB DDR-2 RAM. TCP/
IP access is via two standard Gigabit Ethernet ports. Serial communications ports (RS-232, RS-485) are standard.
One or two option cards can be added for additional communications, e.g. LonWorks FTT-10, or another RS-232 port. A MiniPCI
slot is also available for WiFi 802.11g support. The WEB/CP-700 uses the QNX Neutrino operating system, with the Oracle Java
Hotspot VM (Virtual Machine).
Two status LEDs are visible atop the cover. Integral contact inputs are provided to allow system monitoring of UPS power and
battery, and an external enclosure door. A rechargeable NiMH battery pack is included inside the unit, and a separate connector
provides recharging and monitoring of an external 12V sealed lead-acid battery ordered separately.
The table below provides a summary of features of the WEB/CP-700 controller model.
.
Table 1. WEB/CP-700 features and options
Model Description Ports
WEB-700-O
CP-700
DIN-mountable controller. PowerPC 440Epx 667MHz processor, 1GB NAND
Flash storage, 1 GB base DDR-2 system RAM.
Includes integral NiMH battery pack, two open enhanced comm option card
slots, one open MiniPCI slot (for WiFi 802.11g option card). Not furnished is
NPB-PWR-UN-H universal power supply, or external 12V sealed lead-acid
battery and harness.
Two 1GB Ethernet,
RJ-45
One RS-232 Serial,
DB-9 male
One RS-485 Serial,
isolated, with 15V/
12Vdc power, 6-
position plug on right
side.
Main controller board
Removed
option cards
DIN-mount base with screw tabs
for panel mount
Connector ports
NiMH battery pack
and shield removed