Filter
Top Products
Configuration and electrical connection
18
Connecting actuators
Danger
Danger to life through electric shock!
Live electrical contacts (actuator outputs, mains fuse
and transformer) lie open while the device is being
cabled. Touching a live contact causes critical injuries.
► All work may only be carried out by authorized spe-
cialized personnel.
If more than 4 actuators are to be connected to the storey controller,
the cables of the actuator must be wired in a distribution box.
The storey controller can control up to 24 actuators. However, no
more than 3 actuators may be connected in any one zone.
The prefabricated cable of the actuators can be extended
from 1 to 3 meters. This cable is available plug-in-ready as
type HCV 2.
► Lay actuator cables to distribution box.
► Wire actuator lines.
► Extend cables to storey controller with the HCV 2 cable.