Filter
Top Products
Assigning zones and issuing room names
41
Off No device installed
Red Setpoint adjuster is installed
Green Hometronic Manager resp. wireless setpoint adjuster
HCU 30 are installed
Orange Hometronic Manager and setpoint adjuster are installed
If heating/cooling is activated, the following information can be
called up:
► Press Installation button briefly again.
The colors of LEDs 1 through 8 indicate the assignment of room
names to the temperature zones.
Green Room name for cooling assigned
Red Room name for heating assigned
Orange Room name for heating/cooling assigned
Checking wireless transmission
► Press Send button on setpoint adjuster.
LEDs 1 through 8 of the assigned zone flash up to three times.
The wireless transmission stops.