Filter
Top Products
Configuration and electrical connection
25
Installing antenna
An antenna must be connected to each storey controller!
Take the antenna function into account when selecting the
operating site:
► Antenna (1) must be
installed outside metal
housings (e.g. switch
cabinets (4)).
► Do not lengthen antenna
cable.
► Install antenna at a suit-
able location near the sto-
rey controller (3). Wireless
connection to setpoint
adjuster (2) must be en-
sured.
► Insert antenna cable into the antenna socket of the storey controller.
Closing housing of storey controller
► Place cover on housing.
► Snap left and right snap locks into place.
► Tighten screw on the front.