Filter
Top Products
13
• Keep holding UP ( ▲) button until the desired time zone (Pacific,
Mountain, Central or Eastern) is highlighted on the unit’s display map in
the Time line
• Release the UP ( ▲) button and the desired Time Zone will be
selected
SETTING CLOCK TIME
• Press and hold MODE button for 3 seconds until the year digits in the
Calendar line will flash
• Press UP ( ▲) or DOWN ( ▼) adjusting to correct year
• Press MODE to confirm and move to the next parameter – the month
digit will flash
• Press UP ( ▲) or DOWN ( ▼) adjusting the current month and then
press MODE to confirm – the date digit will flash
• Press UP ( ▲) or DOWN ( ▼) adjusting the date and then press
MODE to confirm – the hour digit will flash in the Time line
• Press UP ( ▲) or DOWN ( ▼) adjusting the hour and then press
MODE to confirm – the minutes will flash
•
Press UP ( ▲) or DOWN ( ▼) adjusting the minutes and then press
MODE to confirm – the temperature unit (C or F) in the Temperature
and Alarm line will flash
• Press UP ( ▲) or DOWN ( ▼) button once selecting the temperature
unit in Fahrenheit or Celsius
• Press MODE for the last time to confirm after the last parameter is set
DAY OF THE WEEK LANGUAGE
• Press and hold DOWN ( ▼) button for 3 seconds to enter into the day
14
of the week language programming mode: the default language
abbreviation will appear (example – EN).
• Continue holding DOWN ( ▼) button until the desired day of the week
language abbreviation is displayed.
• Release the DOWN ( ▼) button and the day of the week will be
displayed in selected language.
ALARMS
The Atomic Projection Clock has dual alarm with programmable snooze interval.
If any of the alarms is activated, it will sound at the set time and the alarm icon
will flash Mondays through Fridays.
SETTING THE ALARM
• Press MODE button to view the ALARM 1 or ALARM 2 modes. If the
AL 1 is selected, the default time “6:00” with the AL1 label will be
displayed. If the ALARM 2 is selected, the default time”8:00”with the
AL 2 label will be displayed
• Press and hold SET button for three seconds - the hour digit will
flash
• Enter the hour using DOWN ( ▼) or UP ( ▲) buttons
• Press SET button once - the minute digits will flash
• Enter minutes using DOWN ( ▼) or UP ( ▲) buttons
• Press SET button once again. The minute digits for snooze
interval will flash
• Enter the desired interval in minutes (from 1 to 59) using DOWN ( ▼)
or UP ( ▲) buttons
• Press SET button once confirming the ALARM 1 time is set.