Filter
Top Products
17
7.2
Interfaces and Buttons
Interface or
Button
Description
Power It is used to connect the power adapter.
LAN1, LAN2 It is used to connect to the Ethernet interface on the computer.
ADSL It is used to connect to the MODEM interface on the splitter.
ON/OFF
It is the power switch and is used to power on or power off the
HG523a.
RESET
You can press and hold the RESET button for over six seconds
to restore the default settings of the HG523a.
Note: After you restore the default settings, your customized
data is lost. Therefore, use this function with caution.
WLAN You can press the WLAN button to enable the WLAN function.
WPS
You can press the WLAN button (less than two seconds) to
enable the WPS function.
7.3
Default Settings
Parameter Setting
IP address of the LAN interface 192.168.1.1
Subnet mask of the LAN interface 255.255.255.0
User name used for logging in to the Web-based
configuration utility
admin
Password used for logging in to the Web-based
configuration utility
admin
Wireless network function Enable
7.4
Technical Specifications
Item Specification
Entire-device power supply 12 V DC, 0.5 A
Entire-device power consumption
≤ 6 W
Ambient temperature for operation 0°C to 40°C (32°F to 104°F)