Filter
Top Products
Aolynk WDR814(I)g ADSL2+ Wireless Router User Manual
4 Advanced Applications
43
Enable
Check to make this trigger setting active.
For detailed port information of your desired applications, please refer to the internet
resources.
3.10.3 Trigger
Some applications use multiple TCP/UDP ports to transmit data. Due to the NAT,
these applications cannot work with the Wireless Security Router. Port Triggering
allows some of these applications to work properly. Note that only one PC can use
each Port Triggering setting at any time.
Application
Enter the name of application you wish to configure in the
Name column to identify this setting.
Triggered
Port Range
Enter the port number or range numbers the application
uses when it sends packets outbound. The Triggered Port
acts as the trigger. When the Wireless Security Router
detects the outgoing packets with these port numbers, it
will allow the inbound packets with the Forwarded Port
Numbers that you set in the next column to pass through
the Wireless Security Router.
Forwarded
Port Range:
Enter the port number or range numbers the inbound
packets carry.
Enable
Check to make this trigger setting active.
The following is a list of port numbers used on some popular applications:
Application Outgoing Control
Incoming Data
Battle.net 6112 6112
DialPad 7175 51200, 51201,51210
ICU II 2019 2000-2038, 2050-2051
2069, 2085,3010-3030
MSN Gaming Zone
47624 2300-2400, 28800-29000
PC to Phone 12053 12120,12122, 24150-24220
Quick Time4 554 6970-6999