IBM 1116 Printer User Manual


 
Argecy Computer Corporation 248-324-1800
86
Auto CRLF/LFCR is set to Off, the factory default.
How the printer formats the end of a line depends on the computer system
being used. Use this setting to select whether or not the printer
automatically performs a carriage return (CR) after a line feed (LF) or a
line feed after a carriage return.
If the Press Button light is off, Auto CR after LF is Off and Auto LF after
CR is Off.
If the Press Button light is on, Auto CR after LF is On and Auto LF after
CR is Off.
If the Press Button light is blinking, Auto CR after LF is Off and Auto LF
after CR is On.
Press the operator panel button with a brief button press to scroll
through the settings.
Press the operator panel button with a double button press to scroll to
the next menu item, Parallel Mode 1.
Turn off the printer to exit the advanced troubleshooting mode.
This light sequence in
advanced troubleshooting
mode: Corresponds to this setting: