Filter
Top Products
System Board
“Battery Assembly” on page 60
“Keyboard” on page 63
“Hard Disk Drive and HDD Heatsink” on page 65
“Processor Heatsink” on page 69
“LCD Assembly” on page 72
“Upper Cover (Keyboard Bezel)” on page 73
Notes:
1. When removing the system board from the base
cover, gently raise the side of the system board
facing the rear I/O ports; then pull out the system
board.
2. When replacing the system board, align the power
switch and power actuator. Make sure that the power
switch operates correctly before securing the screws.
Step
Size
(Quantity)
Head &
Color Torque Memo
1 M2.5 x 6L
(2)
Bind
head,
black
3.2
kgf-cm
w/
nylok
paste
Note: Make sure you use the correct screw for replacement.
ThinkPad i Series 1400 (Part I) 85