Filter
Top Products
Follow the instructions on the screen.
Installation Instructions for Windows 95
To install the DVD movie player program for Windows 95, do the
following:
1 Install DirectX 5.0 (for OSR2.0 or OSR2.1 users).
a. Insert the DVD Software CD-ROM in the DVD drive.
b. Type X:\DX5 \SETUPDX5.EXE and press Enter.
c. Shut down and restart the system.
2 Install the DVD movie player program.
a. Insert the DVD Software CD-ROM into the DVD drive.
b. Click on Start and Run....
c. Type X:\DVDPLAYR\SETUP and press Enter.
Note: X is the drive letter of the DVD drive.
Selecting the Region Code
DVD Region Codes
Regional coding is part of the protection scheme for DVD content.
The world is divided into six regions, so that specific content can
be viewed only in the region where it is appropriate. For
example, Region 1 (U.S. and Canada) content can be viewed only
in Region 1. The DVD Movie Player Program application is also
region–specific.
You must select a region to play DVD content. After you have
selected a region, you can play content only from that region.
You cannot change the region code without reformatting the
drive and reinstalling Windows 98.
Make sure the first DVD content you play is from the appropriate
region. You can verify the region code of the content by looking
at the region code symbol on the back of the content packaging.
Attention: If the first DVD you play is from a region other than
the region you selected, your system will no longer play DVD
content. Contact the IBM PC HelpCenter. See Appendix A,
“Help and Service Information” on page 2-1.
Note: X is the drive letter of the DVD drive.
Note: X is the drive letter of the DVD drive.
Part 1. Using the DVD Drive
1-7