Filter
Top Products
9 Select Search for a better driver than the one your device is
using now. (Recommended) by clicking on it. Then click on
Next.
10 Put a check mark in the Floppy disk drives check box by
clicking on it.
11 Insert the Display Driver Diskette (NM2160) for Windows
98/95 into the diskette drive, and click on Next.
12 When a message appears that Windows has found NeoMagic
MagicGraph 128XD, click on Next.
If you are prompted for the source directory, type A:\
13 Click on Finish.
14 Remove the diskette from the diskette drive, and click on Yes to
restart the computer.
15 When the computer restarts, select screen settings for the color
palette, desktop area, and font size; then click on Close.
16 Click on Start.
17 Move the cursor to Settings; then click on Control Panel.
18 Double-click on the Display icon.
19 Click on the Setting tab.
20 Set the Colors and Screen areas in the “Display Properties”
window.
21 Click on OK to close the window.
Installing the Display Driver for Windows 95
To install the display driver for Windows 95, do the following:
1 Start Windows 95.
2 Click on Start.
3 Move the cursor to Settings; then click on Control Panel.
4 Double-click on Display; then click on the Settings tab.
5 Click on Advanced Properties.
6 Click on the Adapter tab; then click on Change....
7 Click on Have Disk...
8 Insert the Display Driver Diskette (NM2160) for Windows
98/95 into the diskette drive, and click on OK.
9 Click on NeoMagic MagicGraph 128XD; then click on OK.
10 Click on Close.
11 Remove the diskette from the diskette drive.
Part 1. Using the DVD Drive 1-5