Filter
Top Products
Installing the DVD Drive in the
UltraslimBay
This section describes how to install the DVD drive. Before you
begin the installation, make sure that the DVD Software CD-ROM,
which includes software programs, was shipped with the DVD drive.
If a device is already installed in the UltraslimBay, go to “Removing a
Device from the UltraslimBay.”
If no device is installed, go to “Installing the DVD Drive in the
UltraslimBay” on page 1-3.
Removing a Device from the UltraslimBay
To remove a device from the UltraslimBay, do as follows:
1 Make sure there is no storage media inserted in the device.
2 Power off the computer, and remove the AC Adapter and
cables; then turn the computer upside down.
3 Push the UltraslimBay device lock to the unlocked position 1 ;
then remove the device from the bay 2 .
2
1
You have now finished removing the device.
Notes:
1. If you want to warm swap the device in the UltraslimBay, you
need to install the hot/warm swap driver.
2. Make sure that the bay LED is off. Never remove the
UltraslimBay device when the bay LED is on.
1-2