IBM 2 Computer Hardware User Manual


 
CCA Release 2.54
   1     1   5a 2d 2 53 61 ...........Z- Sa
6d 7 6c 65 2 5 72 6f 66 69 6c 65 2 31 2 2d mple Profile 1 -
ab cd   4a 5f 53 6d 69 74 68 2 41 44 4d 49 ....J_Smith ADMI
4e 31 2 2 7 cd 6 1 7 cd c 1f  24  1 N1 ........."..
 2  1 1 8 7 ce 6 1 8    fb f5 . ..............
c4 84 75 5f ba 59 6b ca 4a 9d ca 8 fb 52 9e e2 ..u_.Yk.J....R..
45 41 EA
Figure B-42. Aggregate Profile Structure
This structure contains the following data fields.
00 00 00 01 The number of profiles that are in the aggregate structure. This
example contains only one user profile, but any number can be included
in the same aggregate structure.
00 00 00 00 A reserved field, which must contain zeros.
User profile The remainder of this structure contains the single user profile that
was described earlier in this section.
Access-Control-Point List
Figure B-43 shows the contents of a sample Access-Control-Point List.
 2     1 17  23   f ff ff ff .........#......
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 2 ................
 2 17  3   8f 99 fe ..........
Figure B-43. Access-Control-Point List
The Access-Control-Point list contains the following data fields.
00 02 The number of segments of data in the access-control-point list. In this
list, there are two discontiguous segments of access-control points. One
starts at access-control point 0, and the other starts at access-control
point X'200'.
00 00 A reserved field, which must be filled with zeros.
00 00 The number of the first access-control point in this segment.
01 17 The number of the last access-control point in this segment. The
segment starts at access-control point 0, and ends with access control
point X'117', which is decimal 279.
00 23 The number of bytes of data in the access-control points for this
segment. There are X'23' bytes, which is 35 decimal.
00 00 A reserved field, which must be filled with zeros.
F0 FF FF FF ... FF FF (35 bytes) This is the first set of access-control points, with
one bit corresponding to each point. Thus, the first byte contains bits
0-7, the next byte contains 8-15, and so on.
02 00 The number of the first access-control point in the second segment.
02 17 The number of the last access-control point in this segment. The
segment starts at access-control point X'200' (decimal 512), and ends
with access-control point X'217' (decimal 535).
B-38 IBM 4758 CCA Basic Services, Release 2.54, February 2005