Filter
Top Products
Installation Instructions
1. Set the power switches for all connected devices to OFF.
2. Unplug the system unit power cord from the power outlet.
Note: Steps 3 through 6 are summarized instructions for
installing the card. Refer to your personal computer operator’s
manual for specific feature card installation instructions.
3. Remove the system unit cover.
4. Install the card in the personal computer. The card can be
installed in any available PCI expansion slot.
5. Replace the system unit cover.
6. Reconnect the cables.
7. Reconnect the power cords.
8. Power on the system unit.
| 9. Depending on the operating system on your PC, you may be
| asked to provide a driver file. This file (PCI327.INF) is on the
| CD-ROM shipped with your 3270 PCI card. If your operating
| system requires the driver, it will display a message indicating
| that a PCI Communication Device has been detected.
| When prompted for the driver, insert the IBM 3270 Emulation
| PCI Adapter CD-ROM into the CD-ROM drive.
| Note: The CD-ROM menu will not self-start when the CD-ROM
| is inserted during the installation process.
| When your operating system has located the driver on the
| CD-ROM, it displays a message indicating it has found a driver
| for the IBM 3270 Emulation PCI Adapter.
| 10. Follow the operating system instructions to complete the
| installation after the driver has been located.
11. Card installation is complete.
Section 2. The 3270 PCI Card for Personal Computers with PCI Buses 9