Filter
Top Products
Running the Diagnostic Utility
Note to Windows NT Users
If your PC operating system is Windows NT, you must run the
setup utility prior to running the diagnostic utility.
This note does
not apply to Windows 95 or Windows 98 users.
Windows NT
users run the setup utility as follows:
1. Logon to the PC running Windows NT.
2. Insert the 3270 PCI CD-ROM into the CD-ROM drive.
| 3. Select Diagnostic Setup for Windows NT only from the
CD-ROM menu.
1. Make sure the PCI card is connected to an active control unit.
2. Start the PC operating system.
3. Make sure no other application is accessing the 3270 PCI card.
4. Insert the 3270 PCI CD-ROM into the drive.
12 3270 Emulation PCI Adapter User’s Guide