IBM 4SA Personal Computer User Manual


 
NetBAY 42 Enterprise Rack (Type 9308 Models 42P, 42X, 4SA, 4SB, 42S, 42E) 95
Note: Use clip nuts if your rack has holes. If your rack has square holes, you can
use the rack-insertion tool or a flat-blade screwdriver to install cage nuts.
2. On the rail marked R, loosen the four screws
2 .
3. Hold the rail against the outside of the right rack-mounting flange, and loosely
insert the two front M6 screws
1 .
4. Extend the rail outside of the rear rack-mounting flange; then, install and tighten
two rear M6 screws
3 .
5. Tighten the two front screws
1 ; then, tighten the four screws 2 .
Repeat step 2 through step 5 to install the rail marked L on the left side of the rack.