Filter
Top Products
152 Hardware Maintenance Manual: IBM PC Server/Enterprise Racks
Figure 67. Connecting and routing the line cord
Reinstall the screw on the cable clamp and repeat this step for the other device, if
you installed two devices.
2. Route the line cords left or right, toward the side of the rack cabinet; then, route
the line cords along the side brace towards the back of the rack cabinet and secure
them with the cable straps that come with this option.
3. Route the line cords toward a dedicated power source, such as a UPS or electrical
outlet. Use the provided cable straps to secure the line cords along the way. Use
the openings in your rack cabinet, if you must exit the rack cabinet to connect to
your power source.
4. After you connect the line cords to properly wired and grounded dedicated
power sources, you can turn on the circuit breaker; then, connect other devices in
your rack cabinet to the seven power outlets on the Rack PDU. Route all other
power cables neatly, and use cable straps to secure the cables that you plug into
the outlets on the Rack PDU.
M
A
I
N
4
5
6
6
7