IBM 63H3110 Printer User Manual


 
Adjusting Print Density (Printing Darker or Lighter)
Situation: You want to increase or decrease the print density, making the print darker
or lighter.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see CONFIG MENU in the display.
3. Press the Item key until you see DENSITY=n* in the display, where n is the
density value currently selected. (2 is the factory default.)
4. Press the Value key until you see the value you want to assign to the toner
density; 4 is the darkest print, 0 is the lightest.
5. Press the Continue/Enter key to select the new density. An asterisk (*) appears
next to the value, showing that it is active.
6. To restore the printer to READY status, press the Online key.
Changing the Language Shown on the Display Panel
Situation: You want to display operator panel messages and menus in a language
other than English.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Shift and Menu keys at the same time. You see LANGUAGE MENU.
3. Press the Item key. LANG=ENGLISH* appears as the first menu item unless the
language has already been changed.
4. Press the Value key until you see the language you want to select.
5. Press the Continue/Enter key. An asterisk (*) appears next to the language,
showing that it is active.
6. To restore the printer to READY status, press the Online key.
18 User’s Guide