IBM 63H3117 Printer User Manual


 
17 option OPTION ERROR
Meaning: The option was detected previously, but is no longer detected.
Action: Make sure that the option is installed correctly.
20 PAPER JAM
Meaning: Paper has jammed while exiting the printer.
Action: See Chapter 4, “Clearing Paper Jams” on page 49.
21 PAPER JAM
Meaning: Paper has jammed near one of the trays.
Action: See Chapter 4, “Clearing Paper Jams” on page 49.
22 PAPER JAM
Meaning: Paper has jammed in the duplex unit.
Action: See Chapter 4, “Clearing Paper Jams” on page 49.
23 PAPER JAM
Meaning: Paper has jammed near the fuser.
Action: See Chapter 4, “Clearing Paper Jams” on page 49.
29 DUPLEX COVER OPEN
Meaning: The cover to the duplex unit is open.
Action: Close the cover.
30 MEMORY OVERFLOW
Meaning: Memory overflow. The printer has received more data than it can fit into
its memory.
Action: If the AUTOCONTINU item in the Config Menu is set to ON, printing
resumes in thirty seconds. Otherwise, press the Continue/Enter key. Check the
current page for errors. See “Memory Requirements” on page 3 for information on
how much memory various options require.
31 MEMORY ALLOC ERROR
Meaning: The printer cannot allocate the memory required to print a job.
Action: If the AUTOCONTINU item in the Config Menu is set to ON, printing
resumes in thirty seconds. Otherwise, press the Continue/Enter key. Check the
current page for errors.
35 COMM ERROR
Meaning: Serial communication error.
Action: Turn off the printer. After a minute, turn the printer back on and then
resend the job.
40 MEMORY OPTION ERROR
Meaning: A SIMM module is not properly seated in its slot or is in some other way
defective.
Action: Turn off the printer. Reseat the SIMM module (see “Installing a SIMM” on
page 99). If the message recurs after you restart the printer, call for service.
Appendix B. Printer Messages 167