Filter
Top Products
Enabling
DMA
for
Windows
XP
To
change
the
DMA
parameter
setting
from
the
Windows
XP
desktop,
do
the
following:
1.
Click
Start.
2.
Click
Control
Panel.
3.
Click
Switch
to
classic
view.
4.
Double-click
System.
5.
Click
the
Hardware
tab.
6.
Click
the
Device
Manager
button.
7.
Click
the
IDE
ATA/ATAPI
controller
to
expand
the
tree.
8.
Double-click
on
the
controller
where
your
Multi-Burner
Plus
is
located
(Primary
IDE
or
Secondary
IDE).
9.
Click
the
Advanced
Settings
tab.
10.
Select
the
appropriate
Transfer
Mode
pull-down
that
corresponds
to
the
Multi-Burner
location,
(Device
0
for
Master,
Device
1
for
Slave).
11.
Select
DMA
if
it
is
available.
12.
Click
OK.
Enabling
digital
audio
extraction
Your
system
must
be
properly
configured
to
play
back
digital
audio
from
this
drive.
There
are
two
setting
that
must
be
configured.
One
setting
is
in
the
device
properties,
and
a
second
setting
is
in
Windows
Media
Player.
To
set
the
device
properties,
perform
the
following
procedure:
1.
Right
click
on
My
Computer,
and
select
Properties.
C-2
IBM
Multi-Burner
Plus
User’s
Guide