IBM 770 Laptop User Manual


 
RT/CMOS
(continued)
real-time clock bytes
(continued)
status register B (hex
00B) 2-23
status register C (hex
00C) 2-24
status register D (hex
00D) 2-24
S
scan codes 2-5
selectable drive-startup
sequence 2-33
sequencing, output voltage 1-11
serial controller port 1-4
serial port 1-4
shutdown status byte, RT/CMOS
RAM configuration 2-25
size, specifications 1-8
SMAPI
assembler sample B-8
BIOS call B-62
C language sample B-9
calling convention B-6
configuration B-22
display device B-14, B-22
display device, set B-24
docking station B-15
event bit definition B-34
function declaration B-57
function description B-12
header image B-4
hotkey sticky/lock, set B-28
installation check B-58
parameter structure B-6
pointing device, set B-26
power management B-29
processor (CPU) B-13
pseudo code B-10
refresh rate B-20
request system hibernation B-52
request system off B-52
request system standby B-51
request system suspend B-51
SMAPI
(continued)
return codes B-11
set hibernation timer B-44
set system resume timer B-50
slave micro control unit B-17
system identification B-12
system information B-12
system sensor B-18
timer control B-31
UltraBay B-16
video B-19
Sound Blaster system settings 3-5,
3-7
speaker data enable 2-32
specifications 1-7, 3-11
acoustical readings 1-9
air temperature 1-8
DMA controller 1-7
electrical 1-8
electromagnetic
compatibility 1-8
heat output 1-8
humidity 1-8
maximum altitude 1-8
microprocessor 1-7
PCMCIA 3-11
refresh rate 1-7
size 1-8
weight 1-8
standards, PCMCIA 3-11
status register A (hex 00A) 2-22
status register B (hex 00B) 2-23
status register C (hex 00C) 2-24
status register D (hex 00D) 2-24
supervisor password 2-32
switch to real 2-30
system board
devices 1-3
CMOS RAM subsystem 1-3
diskette drive controller 1-4
DMA controller 1-3
EEPROM subsystem 1-3
expansion bus adapter 1-4
interrupt controller 1-4
keyboard/auxiliary device
controller 1-4
X-4 Index