Filter
Top Products
Notes:
a. Notice of the orientation of the notches 1 on the microprocessor. This is
important when reinstalling the microprocessor on the system board.
b. Do not drop anything onto the microprocessor socket while it is exposed.
The socket pins must be kept as clean as possible.
6. Make sure that the microprocessor retainer is fully open.
7. Loosen the protective cover 3 that protects the gold contacts on the new
microprocessor 2 but do not remove it. Use the vacuum pen 1 to pick up
the microprocessor then completely remove the cover.
8. Position the microprocessor so that the notches on the microprocessor are
aligned with the tabs in the microprocessor socket.
22 Hardware Replacement Guide