Filter
Top Products
Important
To avoid damaging the microprocessor contacts, do not tilt the
microprocessor when installing it into the socket.
9. Using the vacuum pen 1, lower the microprocessor straight down into the
microprocessor socket.
Note: Install the black protective cover that was removed from the new
microprocessor onto the defective microprocessor after the installation is
complete.
10. Pivot the microprocessor retainer3 to the closed position and pivot the
locking lever 2 to secure the microprocessor 1. Make sure the locking
lever is engaged with the retainer tab when securing the microprocessor.
Chapter 2. Replacing hardware 23