Filter
Top Products
To replace the cover, go to “Completing the parts replacement” on page 31.
Removing and replacing the front bezel
1. Remove the computer cover. See “Removing the cover” on page 5.
2. To release the front bezel from the chassis, press the blue button at the top of
the chassis and pull the bezel outward as shown.
3. To install the bezel, align the tabs on the bottom of the bezel with the
corresponding holes in the chassis. Pivot the bezel until it snaps into position at
the top of the chassis.
4. Go to “Completing the parts replacement” on page 31
Replacing the power supply
Attention:
Do not open your computer or attempt any repair before reading the “Important safety
information” in the Quick Reference that was included with your computer or in the
Hardware Maintenance Manual (HMM) for the computer. To obtain copies of the Quick
Reference or HMM, go to http://www.ibm.com/pc/support/.
This procedure requires a flat-blade screwdriver.
1. Remove the computer cover. See “Removing the cover” on page 5.
2. Disconnect the power supply connectors at each of the drives.
6 Hardware Replacement Guide