Filter
Top Products
Installing the device driver for Windows 2000 or Windows Me
To install the device driver in Microsoft Windows 2000 Professional or Microsoft Windows
Millennium Edition (Me), do the following:
Note: You must download files from the IBM Monitor CD to use the Plug and Play feature in
Windows 2000 or Windows Me.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
2000 or Windows Me operating system.
4. Open the Display Properties
window by clicking Start, Settings,
Control Panel and then double-clicking the Display
icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Upgrade Device Driver Wizard window by clicking on Update Driver and then
click the Next button.
11. Select Display a list of the known drivers for this device so that I can choose a
specific driver and then click the Next button.
12. Insert the IBM Monitor CD into the CD drive and click the Have Disk
button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the DRIVERS folder.
15. Select IBM C220p CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
9