IBM C220p Computer Monitor User Manual


 
Further information
Display modes
The display modes and monitor uses are controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position, and shape may change when the display mode changes. This is
normal and the image can be readjusted using the monitor controls.
To ensure flicker-free operation, select the highest (non-interlaced) refresh rate that both the
computer and the monitor can support, (generally 75 Hz or higher), for the addressability that
your application requires.
For the display modes listed below, the screen image has been optimized during manufacture.
Resolution Refresh Rate Horizontal Frequency
640 x 480 60Hz 31.5kHz
720 x 400 70Hz 31.5kHz
1024 x 768 85Hz 68.6kHz
1280 x 1024 85Hz 91.1kHz
1600 x 1200 85Hz 106.3kHz
1920 x 1440 75Hz 112.5kHz
1920 x 1440 85Hz 128.5kHz
2048 x 1536 75Hz 120.5kHz
Table1. Factory Preset Mode
Power Management
To benefit from power management, the monitor must be used in conjunction with a computer
that implements the Video Electronics Standards Association (VESA) Display Power
Management Signalling (DPMS) Standard.
The power management feature is invoked when the computer recognizes that you have not
used your mouse or keyboard for a user-definable period of time. There are several states
described in the table below.
State
Power
indicator
Screen Restoring Operation Compliance
On Green Normal
Off Amber Blank
Press a key or move the mouse. E
NERGY STAR®
16