IBM ILV200 Projector User Manual


 
1Computer cable 2USB mouse
Note: Many mobile computers do not automatically turn on their external
video port when a secondary display device such as a projector is
connected. See your computer manual for the command that activates
the external video port. Press F7 on your IBM ThinkPad to activate the
external display. Activation commands for some mobile computers are
listed in Appendix B.
Note: If you are connecting the projector to an older Macintosh computer that
does not have a 15-pin connector, you must use a Mac adapter between
the computer and the projector.
To control the computer mouse from the projector remote control or keypad,
plug the end of the M1-DA analog computer cable into the mouse connector
on your computer.
Note: The USB mouse is supported for use only with Microsoft
®
Windows
®
98,
Microsoft Windows 2000 Professional, and Apple OS 8.5 and later.
To play the audio from your computer audio on the projector, plug either end
of the audio cable into the audio connector on your computer. Plug the other
end of the audio cable into the speaker connector on the projector.
For information about starting the projector and computer, go to Starting the
projector and adjusting the imageon page 1-9.
Note: You do not need to restart your computer after connecting a USB mouse.
It is hot-pluggable.
Connecting a video player
Use the following procedure to connect a video player.
If your video player uses a round, one-prong composite video connector, youll
need only the audio cable, audio adapter, and composite video cable that
comes with the projector. If your video player uses a round, four-prong S-video
Installation and users guide 1-7