Filter
Top Products
reactivate the remote control.
To use the forward and backward buttons on the remote to advance slides in
PowerPoint
®
, connect the USB connector on the computer cable to the
computer. You must install the USB drivers on your computer to enable USB
connectivity. To configure the PowerPoint for this, click Options from the Tools
menu, click the View tab, deselect the Popup Menu on Right Mouse Click
option in the Slide Show section, and then click OK. Then, when you are in
the PowerPoint Slide Show mode, click the left mouse button to advance to the
next slide, and click the right mouse button to return to the previous slide
(other PowerPoint modes are not affected).
Adjusting the projector
To focus the image, rotate the focus ring 2(see the following illustration)
until the image is clear. To zoom the image, rotate the zoom ring1. This
adjusts the image size without affecting focus.
1
2
The projector is equipped with a self-locking, quick-release elevator foot and
button. To raise the projector:
1. Press and hold the elevator button 1(see the following illustration).
1-12 iLV200/iLC200 IBM Data/Video Projector: User’s Guide